PHD2 can't manage to connect the mount. was created by Laurent 4 years 7 months ago #53243 Hi all, I try to use PHD2 alone to check perriodic errror of my mount, but PHD2 doen't detect the driver of …

Even trying to start Phd2 from ekos, PHD2-mount connection fails. Mount connection window in Phd2 shows that indi is connected . When the indi button is clicked it loads all the indi properties including …

My problem is that each capture, the EKOS guide module indicates that the star is lost and resets guiding, although is not visible at PHD2, everything is fine. I set the dithering value at 4 pixel but after …

Astroberry PHD2 Lodestar was created by sergio 3 years 10 months ago - 3 years 10 months ago #64500

Getting Started with INDI This guide provides a comprehensive introduction to INDI (Instrument-Neutral Distributed Interface), a protocol and framework for controlling astronomical equipment. It covers the …

Replied by alacant on topic PHD2: Settling failed event ignored 5 years 5 months ago #40114 Thanks. make has just completed:)

In PHD2, you can configure which cameras and mounts you are connected to and where the guide commands are sent. So if there is a problem with using the Skysensor when using PHD2, either …

Under what conditions would guiding be suspended? I'm using PHD: I have never set any parameters to having guiding suspended in PHD2, EKOS or INDI panels, yet,...

The procedure worked great, I think, but now I have a conflict between the results from the polar alignment tool and PHD2's Guide Assistant. I did not bother with parking; just used the HC to turn the …

301 Moved Permanently 301 Moved Permanently nginx